How to program a Weezidot

Steps to Program a WeeziDot

1. Select the WeeziDot
   • Open WeeziApp and make sure your phone’s Bluetooth is enabled.
   • From the list of available WeeziDots on the screen, select the one you want to program.
2. Access the mission settings
   • Tap on “Settings / Missions”.
   • Click on “Start a new mission”.

If You Have a WeeziCloud Account

If you have a WeeziCloud account, you get access to advanced features such as data backup and sharing.

1. Set the measurement parameters
   • Measurement frequency: Choose the measurement interval (e.g., every 5 minutes, every hour, etc.).
   • Alarm levels: Set the temperature thresholds (minimum and maximum) that should not be exceeded.
2. Add a recipient (optional)
   • You can assign a recipient from the list of WeeziCloud users.
   • This person will receive an email notification when the mission starts.
3. Confirm the mission
   • Review the settings and confirm.
   • The mission starts immediately, and the data is stored in WeeziCloud.

In WeeziCloud, this mission will appear with the status “In Progress.” As soon as someone reads this WeeziDot and uploads the data to WeeziCloud, the mission status will change to “Read,” and you will receive a confirmation email with a link to view the data (graph, value list, temperature excursions…). You can print or export this information to Excel.

If You Do Not Have a WeeziCloud Account

Even without a WeeziCloud account, you can program a WeeziDot locally using WeeziApp.

1. Set the measurement frequency
   • Select the temperature logging interval.
2. Confirm the mission
   • Review the settings and tap on “Start”.
   • The mission starts immediately.