Detail of an Equipment
Thermotrack Webserve
Graph The graph shows the values and the high and low alarm thresholds. By default, the graph shows the values...
- Home
- Thermotrack Webserve
- Use of Thermotrack Webserve
Use of Thermotrack Webserve
-
-
Setting a temperature or humidity sensor
Thermotrack WebserveIn the “Settings” menu choose “Equipment” and “Add Equipment”. Note : a piece of equipment belongs to a “Zone”. A... -
Setting up a 4.20 mA sensor
Thermotrack WebserveIf you connect a sensor with 4.20 mA output (CO2, Pressure, others…) proceed as for another sensor and choose FoxNet... -
Setting up a Thermo Button for Thermotrack Webserve
Thermotrack WebserveCreation of an equipment Open the TB WEB LINK software. In the main Menu of TBWeb link, choose the menu... -
Create/Modify Users
Thermotrack WebserveCreate : modify users You can create users you will share your data with. They will be Users, Administrators, Super... -
Download of a Thermo Button with Thermotrack Webserve
Thermotrack WebserveOpen TB Web Link software. Use the “Download” icon. Place the button on the reader. The graph is displayed automatically... -
How do I know the balance of SMS on my account ?
Thermotrack WebserveThe balance is displayed on the home page. An email is also sent the all Super Administrators when the balance... -
Calibration of sensors
Thermotrack WebserveThe calibration function integrated into Thermotrack-Webserve allows you to adjust your sensor values based on the discrepancies observed in a... -
Triggering a Siren or Relay Output
Thermotrack WebserveYou can trigger a siren or activate a relay if the alarm thresholds are exceeded. In the Equipment settings, check... -
Paramétrage des envois d’alarmes
Thermotrack WebserveThere are two ways of configuring how alarms are sent out From an Equipment’s parameters, and you choose which Users...
