Resetting a FoxNet Controller restores its factory settings. To do this, follow the instructions below. Be certain power has been removed from the Controller Remove the lid of the Controller by unscrewing the four corner screws Once lid is removed, with connector panel positioned towards you, locate the two plated…
The Mapping module enables you to check whether your equipment is stable and homogeneous, and to issue reports in compliance with ISO 60038-3-5, which define the criteria for testing the conformity of climatic chambers (warehouses, cold rooms, refrigerators, ovens, isothermal boxes, etc.). License The Mapping module requires the purchase of…
Open TB Web Link software. Use the “Download” icon. Place the button on the reader. The graph is displayed automatically on Thermotrack Webserve. The mission is relaunched. The Button memory is cleared and ready for new logging.
The Synchronization Module allows you to import readings taken with a cell phone and the Thermotrack Mobile application. Licence The synchronization module is subject to the purchase of an additional license. Please contact your distributor to know the commercial conditions. The module is installed with your Thermotrack software. You just…
The Expert Module 21 CFR part 11 gives you the possibility to : Give a login and password to each user and give then specific rights. Generate an audit trial. Create non violable PDF / A reports. Licence The Expert is subject to the purchase of an additional license. Please…
I need a licence code, or I have lost my access code. Thermotrack PC opens the demo version. Plug the blue USB adpater. Open Thermotrack PC. The following window will appear, showing the 16 digit serial number of the USB adapter (Ending by 81). Send this number by email to…
The balance is displayed on the home page. An email is also sent the all Super Administrators when the balance reaches 50, then 10 then 5 SMS.
There are two ways to set up alarm dispatch From the Equipment settings, you choose which Users to prevent From a user’s parameters, you choose which equipment to associate with him/her Menu: Settings -> Equipment Choose an Equipment Press the “Alarms” button Select from the list the users to be…
To add a sensor connected to a FoxNet logger in Net Device Manager, follow these instructions Add a new FoxNet Controller Open Net Device Manager In the “Network Devices” menu, click on “New”. The list of Controllers on the network appears as follows Note: If your Controller is connected to…
Download Thermotrack PC from our site https://www.plugandtrack.com/en/downloads/ or directly here (Make sure to download the version you purchased) Version 9 Version 8 Note for administrators Make sure that users will have write permissions in the C:\ProgramData\Proges-Plus\Thermotrack directory (Database) Requirements for Thermotrack PC The minimum requirements for installing and using Thermotrack…
