{"id":1360,"date":"2024-04-22T15:15:52","date_gmt":"2024-04-22T13:15:52","guid":{"rendered":"https:\/\/support.plugandtrack.com\/kb\/lire-une-sonde-pour-un-etalonnage\/"},"modified":"2025-05-05T17:03:03","modified_gmt":"2025-05-05T15:03:03","slug":"how-to-read-a-sensor-for-calibration","status":"publish","type":"ht_kb","link":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/","title":{"rendered":"How to read a sensor for calibration"},"content":{"rendered":"

If you want to calibrate a sensor with Sensor Net Connect or FoxNet\u00a0 in your laboratory, this article explains how to read the values on your PC without using Thermotrack-Webserve.<\/p>\n

A ) Install the FoxNet Controller or Sensor Net Connect on your Ethernet network<\/h2>\n

Important note if you are using FoxNet probes: do not install the batteries now<\/span>. Follow the instructions and do not connect the batteries until your Controller has been installed and you are ready to add your sensors to Thermotrack-Webserve.<\/strong><\/p>\n

    \n
  1. Connect the Net Connect Controller or Sensor to your network (with dynamic IP address)<\/li>\n
  2. Download and install the Microchip Ethernet Discoverer software <\/a><\/li>\n
  3. Open Microchip Ethernet Discoverer
    \n\"microchip<\/li>\n<\/ol>\n

    B) FoxNet sensors only<\/h2>\n

    Reset the FoxNet box by proceeding as follows as explained here<\/a><\/p>\n

    You must then link the FoxNet recorders to this controller<\/p>\n

      \n
    1. Use the “System Configuration” and “Devices” menus
      \n\"link<\/li>\n
    2. The Unlinked Devices section contains FoxNet loggers that are not linked.
      \nThe Linked Devices section contains loggers that are already linked.
      \n\"Link-FoxNet-devices\"<\/li>\n<\/ol>\n

      C) Read the values<\/h2>\n
        \n
      1. Click on one of the lines to move a logger from one state to another.<\/li>\n
      2. Click on the desired line. The information for the selected FoxNet Controller is displayed in your Internet browser
        \n\"home<\/li>\n<\/ol>\n

        Read values from a sensor<\/h1>\n
          \n
        1. Click on the line of the sensor you want to read.<\/li>\n
        2. Select the values you want to be displayed.
          \nExample below with a temperature and humidity sensor
          \n\"\"<\/li>\n
        3. Choose Duration = 15 minutes and press “Begin”.
          \n
          \nDo not close the window, otherwise you’ll lose all the values.<\/strong><\/span><\/li>\n
        4. When you have enough data, press the “Download” button and save the file in CSV format so that you can read the historical values in Excel.<\/li>\n<\/ol>\n

          \"\"<\/p>\n

           <\/p>\n","protected":false},"excerpt":{"rendered":"

          If you want to calibrate a sensor with Sensor Net Connect or FoxNet\u00a0 in your laboratory, this article explains how to read the values on your PC without using Thermotrack-Webserve. A ) Install the FoxNet Controller or Sensor Net Connect on your Ethernet network Important note if you are using…<\/p>\n","protected":false},"author":1,"comment_status":"open","ping_status":"closed","template":"","format":"standard","meta":{"footnotes":""},"ht-kb-category":[62],"ht-kb-tag":[],"class_list":["post-1360","ht_kb","type-ht_kb","status-publish","format-standard","hentry","ht_kb_category-tech-notes"],"yoast_head":"\nHow to read a sensor for calibration Support Plug and Track<\/title>\n<meta name=\"description\" content=\"How to read a sensor for calibration Support Plug and Track\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to read a sensor for calibration\" \/>\n<meta property=\"og:description\" content=\"How to read a sensor for calibration Support Plug and Track\" \/>\n<meta property=\"og:url\" content=\"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/\" \/>\n<meta property=\"og:site_name\" content=\"Support Plug and Track\" \/>\n<meta property=\"article:modified_time\" content=\"2025-05-05T15:03:03+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2022\/04\/Microchip-Ethernet-Device-Discoverer.png\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"379\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/\",\"url\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/\",\"name\":\"How to read a sensor for calibration Support Plug and Track\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/support.plugandtrack.com\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Microchip-Ethernet-Device-Discoverer.png\",\"datePublished\":\"2024-04-22T13:15:52+00:00\",\"dateModified\":\"2025-05-05T15:03:03+00:00\",\"description\":\"How to read a sensor for calibration Support Plug and Track\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/#primaryimage\",\"url\":\"https:\\\/\\\/support.plugandtrack.com\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Microchip-Ethernet-Device-Discoverer.png\",\"contentUrl\":\"https:\\\/\\\/support.plugandtrack.com\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Microchip-Ethernet-Device-Discoverer.png\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/thermotrack-webserve-en\\\/tech-notes\\\/how-to-read-a-sensor-for-calibration\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to read a sensor for calibration\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/\",\"name\":\"Support Plug and Track\",\"description\":\"All answers to your questions about our products\",\"publisher\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#organization\"},\"alternateName\":\"Comment installer et utiliser les logiciels Thermotrack\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#organization\",\"name\":\"Support Plug and Track by Proges Plus\",\"url\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/support.plugandtrack.com\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/logo-plugandtrack.png\",\"contentUrl\":\"https:\\\/\\\/support.plugandtrack.com\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/logo-plugandtrack.png\",\"width\":225,\"height\":225,\"caption\":\"Support Plug and Track by Proges Plus\"},\"image\":{\"@id\":\"https:\\\/\\\/support.plugandtrack.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.linkedin.com\\\/showcase\\\/plug-and-track\\\/\"],\"description\":\"PLUG AND TRACK\",\"email\":\"support@thermotrack.com\",\"telephone\":\"+33320646363\",\"legalName\":\"PROGES PLUS\",\"foundingDate\":\"1985-09-01\",\"vatID\":\"FR53333601573\",\"taxID\":\"FR53333601573\",\"duns\":\"380299917\",\"numberOfEmployees\":{\"@type\":\"QuantitativeValue\",\"minValue\":\"11\",\"maxValue\":\"50\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"How to read a sensor for calibration Support Plug and Track","description":"How to read a sensor for calibration Support Plug and Track","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/","og_locale":"en_US","og_type":"article","og_title":"How to read a sensor for calibration","og_description":"How to read a sensor for calibration Support Plug and Track","og_url":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/","og_site_name":"Support Plug and Track","article_modified_time":"2025-05-05T15:03:03+00:00","og_image":[{"width":800,"height":379,"url":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2022\/04\/Microchip-Ethernet-Device-Discoverer.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/","url":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/","name":"How to read a sensor for calibration Support Plug and Track","isPartOf":{"@id":"https:\/\/support.plugandtrack.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/#primaryimage"},"image":{"@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/#primaryimage"},"thumbnailUrl":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2022\/04\/Microchip-Ethernet-Device-Discoverer.png","datePublished":"2024-04-22T13:15:52+00:00","dateModified":"2025-05-05T15:03:03+00:00","description":"How to read a sensor for calibration Support Plug and Track","breadcrumb":{"@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/#primaryimage","url":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2022\/04\/Microchip-Ethernet-Device-Discoverer.png","contentUrl":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2022\/04\/Microchip-Ethernet-Device-Discoverer.png"},{"@type":"BreadcrumbList","@id":"https:\/\/support.plugandtrack.com\/en\/thermotrack-webserve-en\/tech-notes\/how-to-read-a-sensor-for-calibration\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/support.plugandtrack.com\/en\/"},{"@type":"ListItem","position":2,"name":"How to read a sensor for calibration"}]},{"@type":"WebSite","@id":"https:\/\/support.plugandtrack.com\/en\/#website","url":"https:\/\/support.plugandtrack.com\/en\/","name":"Support Plug and Track","description":"All answers to your questions about our products","publisher":{"@id":"https:\/\/support.plugandtrack.com\/en\/#organization"},"alternateName":"Comment installer et utiliser les logiciels Thermotrack","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/support.plugandtrack.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/support.plugandtrack.com\/en\/#organization","name":"Support Plug and Track by Proges Plus","url":"https:\/\/support.plugandtrack.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/support.plugandtrack.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2023\/01\/logo-plugandtrack.png","contentUrl":"https:\/\/support.plugandtrack.com\/wp-content\/uploads\/2023\/01\/logo-plugandtrack.png","width":225,"height":225,"caption":"Support Plug and Track by Proges Plus"},"image":{"@id":"https:\/\/support.plugandtrack.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.linkedin.com\/showcase\/plug-and-track\/"],"description":"PLUG AND TRACK","email":"support@thermotrack.com","telephone":"+33320646363","legalName":"PROGES PLUS","foundingDate":"1985-09-01","vatID":"FR53333601573","taxID":"FR53333601573","duns":"380299917","numberOfEmployees":{"@type":"QuantitativeValue","minValue":"11","maxValue":"50"}}]}},"_links":{"self":[{"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/ht-kb\/1360","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/ht-kb"}],"about":[{"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/types\/ht_kb"}],"author":[{"embeddable":true,"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/comments?post=1360"}],"version-history":[{"count":0,"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/ht-kb\/1360\/revisions"}],"wp:attachment":[{"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/media?parent=1360"}],"wp:term":[{"taxonomy":"ht_kb_category","embeddable":true,"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/ht-kb-category?post=1360"},{"taxonomy":"ht_kb_tag","embeddable":true,"href":"https:\/\/support.plugandtrack.com\/en\/wp-json\/wp\/v2\/ht-kb-tag?post=1360"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}