How to reset a Sensor Net connect

Reset a Sensor Net Connect will restore the default settings. To do so, follow the instructions below:

  1. Open the top lid
  2. Unplug the Ethernet cable (if Ethernet cabled version)
  3. Connect the 2 pins together using a paper clip
  4. Power the Sensor Net Connect again
  5. Keep the 2 pins connected together for 5 seconds, till the LED is continuously ON
  6. Remove the contact on the 2 pins. The LED flashes again

réinitialiser sensor net connect

Updated on 01/11/2023

Was this article helpful?

Related Articles

Leave a Comment