1. Home
  2. Thermotrack Webserve
  3. Troubleshooting Thermotrack-webserve
  4. How to install a SNC on a different IP network ?

How to install a SNC on a different IP network ?

  • If you have Sensor Net Connect on different sub networks, Net Device Manager is unable to find them when  set as DHCP.
  • Change the setting to Static IP address in the Tools section.
  • When you will add an new Sensor Net Connect, you will be able to enter manually the IP address.

If you do not know the IP address, you can use the Microchip Ethernet Discoverer software. It will scan you network and display the Sensor Net Connect on your network.

You can find it it C:\Program Files (x86)\PROGES-PLUS\NetDeviceManager

Or you can download it at http://thermobouton.fr/ftp/plugandtrack/Thermotrack-Webserve/Microchip%20Ethernet%20Discoverer.exe

You also can also use the Magic Config software and plug the Sensor Net connect on your computer. It is a great help, especially for the Wi-Fi setting

Download it at :

Updated on 28/01/2022

Was this article helpful?

Related Articles

Leave a Comment